GF 213 is a 3.75 mil clear embossed polypropylene film designed for use as an economical protective laminate for Traffic
Graffic® decals. This non-glare laminate is also an environmentally friendly alternative to vinyl films. GF 213 laminate offers a
permanent acrylic pressure sensitive adhesive formulated for exceptional clarity and bond for printed graphic applications.
It is intended for use as a laminating film for producing short term indoor Traffic Graffic floor decals, table and counter top
applications. GF 213 is also approved for indirect food contact. The adhesive is formulated to adhere to most common printing
inks. GF 213 has been rated for slip resistance based on multiple testing methods.
GF 213-54
GF 213 is a 3.75 mil clear embossed polypropylene film designed for use as an economical protective laminate for Traffic Graffic® decals.
Description
Technical Specification
Applications | This product is intended for use as an overlaminating film to produce short term indoor Traffic Graffic® floor decals, table and counter top applications. Concept® 213 is also approved for indirect food contact. The adhesive is formulated to adhere to most common printing inks. However, specific formulations must be tested before use. Some inks may contain excessive flow additives that could reduce adhesion of this product. Test before production. |
Slip Resistance | Concept® 213 is classified under UL 410 for floor graphics overlay applications. |
Indirect Food Contact | The film and adhesive complies with the following citations in 21CFR 174 thru 182 and 21CFR 175.105 respectively. |
Thickness | Film: 3.75 mils. Adhesive: .8 to 1.1 mils. Liner: 4 mils. (Thickness variance +/- 10%) |
Temperature Ranges | Minimum application temperature: +40° F Service temperature range: -40°F to +200°F. |
Expected Exterior Exposure | This product is designed for interior applications. |
Durability | Concept® 213 will function as a floor overlaminate for six (6) months under normal use. |
Adhesion | To stainless steel 40 oz/in. Tested according to PSTC-101 Method A with 24-hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production. |
Water Resistance | Good |
Humidity Resistance | Excellent. |
Storage Stability | Six (6) months shelf life when stored at 70°F and 50% relative humidity. |
Product Codes | 213-54 54” x 150’ |
Recommendations | Completely evaporate ink solvents before application. Failure to do so may facilitate solvent penetration resulting in premature vinyl degradation. |
Additional information
Weight | 33 lbs |
---|---|
Dimensions | 57 × 7 × 7 in |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.