GF 238 MotoMark® ARMOR 12.0 mil is a flexible gloss clear laminate that offers UV protection and is designed for use as a protective overlaminating film when used in combination with GF 235 MotoMark® GRIP vinyl. MotoMark® is recommended for a variety of applications including Quads, Snowmobiles, Motocross, Powersport Vehicles, Helmets and Carts. The adhesive system is formulated to adhere to most common solvent, eco-solvent, latex, thermal, UV, offset and screen inks.
GF 238-24
GF 238 MotoMark® ARMOR 12.0 mil is a flexible gloss clear laminate that offers UV protection and is designed for use as a protective overlaminating film when used in combination with GF 235 MotoMark® GRIP vinyl.
Technical Specification
Applications | Concept ® 238 MotoMark™ is intended for use as the overlaminating film on Concept® 235 MotoMark™ 4.0 mil “Grip”. This overlaminate and vinyl combination is used for a variety of Quads, Snowmobiles, Motocross, Powersport Vehicles, Helmets and Carts. The adhesive system is formulated to adhere to most common solvent, eco-solvent, latex, thermal, UV, offset and screen inks. However, specific formulations must be tested before use. Some ink may contain excessive flow additives that could reduce adhesion of this product. Testing is always suggested before production. Specifically test applications to gas tanks. |
Thickness | Film: 12.0 mils. Adhesive: 1.8 to 2.2 mils. Liner: 3.0 mils. (Thickness variance +/- 10%) |
Temperature Ranges | Minimum application temperature: +40° F Service temperature range: -40°F to +200°F. |
Expected Exterior Exposure | 5 Years. Under normal exposure conditions and proper care |
Adhesion | To stainless steel 40 oz/in. PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production |
Surface Gloss | Minimum 80 when measured at 60° MD fresh. |
Water Resistance | Excellent. |
Humidity Resistance | Excellent |
Storage Stability | One year shelf life when stored at 70°F and 50% relative humidity. |
Product Codes | 238-30 24”x 75’ 238-24 54”x 75’ 238-60 30”x 75’ 238-54 60”x 75’ |
Recommendations | Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation. Always thoroughly test this product to confirm that it meets your requirements. Proper surface preparation requires cleaning with alcohol or acetone to clean and remove contaminates before application. Failure to prepare the surface can cause premature failure of the graphic or decal. |
Additional information
Weight | 25 lbs |
---|---|
Dimensions | 27 × 7 × 7 in |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.